ROXELL - 031 - 0516
FLEX-AUGER - INSTALLATION INSTRUCTIONS
III-49
Glue outside
Glue inside
IN CHAPEL FORM
:
FIGURE 108.
FIGURE 109.
For well flowing mash
and pellets.
For difficult flowing feed.
Use contact glue to fix
the telescopical tube.
Glue inside
Glue outside
Elbow
Drop tube
Drop tube
Telescopical tube
Outlet
Parcker screw
FIGURE 110.
max.
Put the telescopical tube in the
feeding trough at its lowest level.
The MEASURE DECAL is placed with 1 at the
upper end of the t elescopical tube.
With this decal, you can adjust feed level in
the trough and make comparisons between
pens.
FIGURE 111.
TO ADJUST THE TELESCOPICAL TUBE
To Next Page
Loading...
