16) PROGRAMMING NOTES (Continued)
TO SET THE TABLE TAX RATE:
The tax table programming calculation uses the left side of the tax breaks. Maximum program
length is 63 steps.
Following is an example of a 4% program from tax tables.
------------------BREAK POINTS-------------------
BREAKS RANGE TAX
13 0.00 - 0.12 0.00
16 0.13 - 0.28 0.01
25 0.29 - 0.53 0.02
25 0.54 - 0.78 0.03
34 0.79 - 1.12 0.04
: 1.13 - 1.28 0.05
: : : :
: : : :
The left side of the chart is used as shown to determine break points. On each set, the smaller
number is subtracted from the larger for the break point.