Royal 140DX - Euro Conversion Rate Programming

34
16) PROGRAMMING NOTES (Continued)
16-19) EURO CONVERSION PRESET ( BASE CURRENCY SETTING )
（ 10 ）－ ( Status ）－ [ Void ]
1 digit
Status : 0 = LOCAL Currency
1 = EURO Currency
Note 1: When the base currency is set to LOCAL, the converted amount is in EURO, and
when the base currency is set to EURO, the converted amount is in LOCAL.
Note 2: Default Value = 0
Example : ( 10 ) – ( 0 ) – [ Void ]
100
16-20) CLERK SECURTY SETTING
( 11 ) – ( Status ) – [ Void ]
1 Digit
Status : 0 = Allows you to enter the clerk # ONLY to assign a clerk for the transaction
registration.
1 = Must enter the clerk # together with the 3 digit security code (in OFF mode)
To assign a clerk for transaction registration. (Default Setting)
Example : ( 11 ) – ( 0 ) – [ Void ]
16-21) EURO CONVERSION RATE PROGRAMMING
( Exp. ) － ( D.P ) – ( RATE ) - [ Clerk ]
0-8 0-3 0.00000001-999999
・ Euro Exchange Rate is programmed using the [ Exp ] and [ Rate ] keys.
・ [ Exp ] = For setting the decimal place for the Euro rate.
・ [ D.P. ] = For setting the decimal place for the exchange amount.
Note : Default Value - Exp. = 0, D.P = 2 RATE = 00001
Example : 1 Euro = 2.5 LOCAL
D.P = 2
( 1 ) – ( 2 ) - ( 000025 ) – [ Clerk ]
110
12000025 △