PROGRAMMING THE
REGISTER
The ER
145
has highly sophisticated electronic technology that allows many programming options to meet the individual needs ot many
businesses The following simple step by step programming procedures
will
allow you to select the options that
will
meet your needs The
programming of these options
is
a one
time
set up operation and once the ER
145
is
programmed there
is
no need to repeat the operation
except to reprogram a change
in
the options
The programming of the register
is
done
with
the control lock switch
in
the
"PGM-1"
and
'PGM-2"
positions Use the manager s (MA) key to
access these positions The "PGM-1" position
is
used to program the tax calculating options the
time
date and periodic total printing
options and the consecutive number and grand total printing options The
"PGM-2"
position
is
used to program the department key
functions
the
tax
rate percentages (Tax 1
and
Tax
2) the discount rate
computation
the
high
digit lock out
the
req
ster
number
and
the
t
me
and date
IMPORTANT It
is
recommended that
in
order to have a complete understanding of the operation of the register the examples given
in
the
following step by step programming procedure be followed All transaction examples given
in
this
manual are based on
this
sample
program Please use our sample program and familiarize yourself
with
the transaction examples Then reprogram the register for your
individual needs
To Next Page
