Publication date: Jan, 2009
Revision A1
126
Function name:
Email/SMS Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email or SMS, or both. It depends on your settings.
An email address or a mobile phone number has to be set in the web page of
alarm configuration (See ). Then, user can read the trap information from the
email or the mobile phone. This function provides 6 email addresses and 6
mobile phone numbers at most. The 21 different trap events will be sent out to
SNMP Manager when trap event occurs. After ticking trap events, you can fill
in your desired email addresses and mobile phone numbers. Then, please
click <Apply> button to complete the alarm . It will take effect in a few seconds.
Note: SMS may not work in your mobile phone system. It is customized for
different systems.
Fig. 3-71
To Next Page
Loading...
Need help?
General
