Publication date: Jan., 2009
Revision A1
67
3-7-1. IGMP Setting
Function name:
IGMP Setting
Function description:
IGMP is used to snoop the status of IP multicast groups and display its
associated information in both tagged VLAN and non-tagged VLAN networks.
Enabling IGMP with either passive or active mode, you can monitor the IGMP
snooping information, which contains the multicast member list with the
multicast groups, VID and member port.
Fig. 3-25
Parameter description:
IGMP snooping mode selection:
The switch supports to enable IGMP snooping function
Enable:
Set “Enable” mode to enable IGMP Snooping function.
Default: un-enable.
Unregistered Multicast Flooding :
The switch supports to enable Unregistered Multicast Flooding function
Enable:
Set “Enable” mode to enable IGMP Snooping function.
Default: Enable
To Next Page
Loading...
Need help?
General
