Publication date: Jan, 2009
Revision A1
68
General Query Interval :
The general query interval is the amount of time in seconds between
IGMP General Query messages sent by the router (if the router is the
querier on this subnet).
Available value: 1-2000 sec
General Query Max Response Time :
The Maximum Response Time field is only used in general or group-
specific query messages. The Maximum Response Time is configured as
the value for the Query response interval setting
Available value: 1-10 sec
General Query Timeout :
The General Query Timeout field is the amount of time in seconds.
Available value: 1-30 sec
Specific Query Count :
To set Specific Query Count on Switch .
Available value: 1-10 times
Specific Query Max Response Time :
To set the specific Query Response Time field is used in specific or
group-specific query messages. The Specific Maximum Response Time
is configured as the value.
Available value: 1-10 sec
Specific Query Timeout :
The Specific Query Timeout field is the amount of time in seconds.
Available value: 1-30 sec
To Next Page
Loading...
Need help?
General
