Publication date: Jan., 2009
Revision A1
128
3-16. Configuration
The switch supports three copies of configuration, including the default
configuration, working configuration and user configuration for your configuration
management. All of them are listed and described below respectively.
Default Configuration:
This is Rubytech’s setting and cannot be altered. In Web UI, two restore
default functions are offered for the user to restore to the default setting of the
switch. One is the function of “Restore Default Configuration included default IP
address”, the IP address will restore to default “192.168.1.1” as you use it. The
other is the function of “Restore Default Configuration without changing current IP
address”, the IP address will keep the same one that you had saved before by
performing this function.
Working Configuration:
It is the configuration you are using currently and can be changed any time.
The configurations you are using are saved into this configuration file. This is
updated each time as you press <Apply> button.
User Configuration:
It is the configuration file for the specified or backup purposes and can be
updated while having confirmed the configuration. You can retrieve it by performing
Restore User Configuration.
Fig. 3-72
To Next Page
Loading...
Need help?
General
