Ruby Tech ES-2410C User Manual

Publication date: Jan, 2009
Revision A1
244
enable tos
Syntax:
enable tos
Description:
To enable IP TOS qos.
Argument:
None.
Possible value:
None.
Example:
ES-2410C (qos)# enable tos
set dscp
Syntax:
set dscp [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description:
To set IP DSCP qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3
<priority>: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order
syntax: 1,2 or 2,5-7, available from 0 to 63.
Possible value:
<priority>: 0 to 63
Example:
ES-2410C (qos)# set dscp q0 2 q1 2 q2 2 q3 3
set pri-tag
Syntax:
set pri-tag [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description:
To set 802.1p qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order.
Syntax: 1,2 or 2,5-7, available from 0 to 7.
Possible value:
<priority>: 0 to 7.
Example:
ES-2410C(qos)# set pri-tag q0 0 q1 1 q2 2 q3 3
ES-2410C(qos)# show priority-tag
802.1p priority
====================

Ruby Tech ES-2410C Specifications

General

Brand	Ruby Tech
Model	ES-2410C
Category	Network Router
Language	English