Publication date: Jan., 2009
Revision A1
141
Weight (1~55):
Over here, you can make an arrangement to Weight values of Queue 0
to Queue 3. The range of Weight you can set is 1~55. In default, the
weight of Queue 0 is 1, the weight of Queue 1 is 2, the weight of Queue
2 is 4, and the weight of Queue 3 is 8.
Function name:
802.1p Setting
Function description:
This function will affect the priority of VLAN tag. Based on priority of VLAN tag,
it can arrange 0~8 priorities, priorities can map to 4 queues of the switch
(queue 0~3) and possess different bandwidth distribution according to your
weight setting.
Fig. 3-85
To Next Page
Loading...
Need help?
General
