Publication date: Jan, 2009
Revision A1
172
Example:
ES-2410C (802.1x)# set reAuthMax 2 2
set reAuthPeriod
Syntax:
set reAuthPeriod <port-range> <sec>
Description:
A constant that defines a nonzero number of seconds between periodic
reauthentication of the supplicant.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 3600
Example:
ES-2410C (802.1x)# set reAuthPeriod 2 3600
set serverTimeout
Syntax:
set serverT
imeout <port-range> <sec>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 30
Example:
ES-2410C (802.1x)# set serverTimeout 2 30
set state
Syntax:
set state <ip
> <port-number>
<secret-ke
y> <Accounting Service> <Accountin g Server> <Accounting Port>
Description:
To configure the settings related with 802.1X Radius Server.
Argument:
<ip> : the IP address of Radius Server, and the IP format is xxx.xxx.xxx.xxx
<port-number> : the service port of Radius Server(Authorization port),
range 1~65535
<secret-key> : set up the value of secret-key, and the length of secret-key is
To Next Page
Loading...
Need help?
General
