声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
48
the main interface and click “AN”(Connection). If the distribution network fails,
please power off the module and re-operate in the same way (multiple networking
failures you can watch the video and try to use the hotspot of the mobile phone to
test).
3.2.3.2 Proper Wi-Fi Connection
When power on RD6012, it will connect Wi-Fi first, and then detect if it can be
connected to APP, and it may not be connected successfully if the phone is under
screen-lock status or the APP is running at the background. If the IP address of the
phone has changed, you need to press the “left direction” button and then press
“ENTER” button to reset the net, repeat 2.2.3.1 operation.
3.2.3.3 APP Operation
IOS APP operation video: https://youtu.be/lXSw1CM9IY8.
Click “AT” / ”AU” text label and enter the value to set the output voltage/
output current, then click at the blank area to return, if you enter a value exceeds the
limit, it cannot be applied. Click “AO” to exports the voltage-current curve to excel
file, up to 24 hours document can be recorded.
Click the personal center to set the software language or get help to use the
APP.
To Next Page
Loading...
