Russelectric RTS03 Series

Need help?

Do you have a question about the Russelectric RTS03 Series and is the answer not in the manual?

Summary

Section 1 Hazard Categories and Special Symbols

Section 3 Safety Precautions

Section 5 Installation

Connecting Power and Control Wiring

Procedures for connecting power cables and wiring, including torque values and conductor restraint.

Pre-Operation Inspection and Testing

Final inspection and testing steps before energizing, including power circuits, ground faults, and insulation resistance.

Section 6 Pre-Energizing Checkout Procedure

Section 7 Energizing the Bypass-Isolation Transfer Switch

Energize the Switch

Step-by-step procedure for safely energizing the transfer switch.

Section 8 Operation

Bypass Switch Operation

Transfer Switch Cradle;Rollout Operation

Bypass Modes and Tests

Explanation of bypass modes and procedures for load/no-load testing.

Bypass and Isolation Procedures

Step-by-step guides for bypassing, isolating, withdrawing, and returning the transfer switch.

Manual Operation Modes

Procedures for internal and external manual operation of the transfer switch.

RPTCS Control System Overview

General description of the RPTCS modular control and monitoring system.

RPTCS Control Panel Interface

Explanation of the control panel's graphical display, keys, indicators, and pushbuttons.

RPTCS Control System Setup

RPTCS Load and No-Load Testing

Procedures for conducting load and no-load operational tests using the RPTCS controller.

Section 9 Maintaining the Bypass-Isolation Transfer Switch

Transfer Switch Inspection Guidelines

General Inspection and Cleaning

Bus Bar Joints, Lug Terminations, and Insulating Materials

Section 10 Adverse Circumstances

Inspection Following a Short Circuit

Clean-up Following a Short Circuit

Water-Soaked Switches