Revision 4 - December 17,1998 Ryan TCAD 9900 Series Page 1-9
H. A complete operational test was performed according to
Ryan TCAD 9900 Series Installation Manual, P/N 32-2301
dated (insert date of manual). The equipment performed
satisfactorily and did not adversely affect existing
components or systems in the aircraft as required by FAR
23.1301 (or FAR 25.1301, FAR 27.1301, or FAR 29.1301 as
applicable).
I. The aircraft equipment list was revised to reflect these
changes; weight and balance data was revised and placed in the
aircraft records. A Ryan TCAD Pilot's Handbook, P/N 32-2302
dated (insert date of Handbook), was placed in the aircraft.
(NOTE: Use of the Annunciator Output and/or interconnection
with a Multifunction Display should also be documented).
Figure 1-4 Sample Description of Work Accomplished
1.10 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
The Instructions for Continued Airworthiness (ICA) document and other information
pertaining to Instructions for Airworthiness are contained in the Literature Pack supplied
with the TCAD. A copy of the ICA document should be provided to the
Owner/Operator. If a copy of the ICA document is not available, contact Ryan
International Corporation for a copy.
To Next Page
Loading...
Need help?
General
