ryan TCAD 9900B User Manual

Revision 4 - December 17,1998 Ryan TCAD 9900 Series Page 1-2
• Altitude Alert - Features Altitude Alert functions for safer, more precise flying.
• Density Altitude - Computes and displays Density Altitude by simply setting OAT.
• Programmable, Selectable Shield - Features pilot selectable shield volumes for
Terminal, Standard, and Enroute modes.
• Dynamic Shield – The monitored airspace will expand for high-performance climbs
and descents, and will automatically transition to the ENRT mode.
• Bearing - Indicates the direction of the traffic for faster visual acquisition.
Multifunction Display - The Model 9900B is capable of providing traffic information to
certain multifunction displays. The Multifunction Display Interface for the ARGUS is
approved under STC 00900NY. For instructions regarding installation, see Model 9900B
Multifunction Display Interface Installation Instructions, Document 32-2304.
TCAD will display multiple aircraft inside the selected shield. The TCAD is advisory only,
and is a back up to the "SEE-AND-AVOID" concept and the ATC radar environment.
Model 9900B Model 9900A Model 9900
Air Traffic Shield Air Traffic Shield Air Traffic Shield
Traffic Display Traffic Display Traffic Display
Trend Data Trend Data Trend Data
Tone Alerts Tone Alerts Tone Alerts
MSL Altitude of traffic MSL Altitude of traffic MSL Altitude of traffic
Host Altitude Display Host Altitude Display Host Altitude Display
Altitude Alert Altitude Alert Altitude Alert
Density Altitude Density Altitude Density Altitude
Programmable, Selectable
Shield
Programmable, Selectable
Shield
Selectable Shield
Dynamic Shield Dynamic Shield
Voice Alerts Voice Alerts
Mode A and N-number Mode A and N-number
Bearing
Multifunction Display
Figure 1-1 Features of the 9900 Series

ryan TCAD 9900B Specifications

General

Brand	ryan
Model	TCAD 9900B
Category	Aircrafts
Language	English