EasyManua.ls Logo

Saba LVIF1019A++44M - Drain Hose and Appliance Positioning; Drain Hose Management; Appliance Positioning and Levelling

Saba LVIF1019A++44M
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Please securely x the drain hose in either position A or
position B
Back of dishwasher
Mains Cable
Drain Pipe
Water Inlet
Drain hose
Counter
How to drain excess water from hoses
If the sink is 1000 higher from the oor, the excess water in hoses
cannot be drained directly into the sink� It will be necessary to
drain excess water from hoses into a bowl or suitable container
that is held outside and lower than the sink�
Water outlet
Connect the water drain hose� The drain hose must be correctly
tted to avoid water leaks� Ensure that the water drain hose is not
kinked or squashed�
Extension hose
If you need a drain hose extension, make sure to use a similar
drain hose�
It must be no longer than 4 meters; otherwise the cleaning eect
of the dishwasher could be reduced�
Syphon connection
The waste connection must be at a height less than 100 cm
(maximum) from the bottom of the dish� The water drain hose
should be xed�
Position The Appliance
Position the appliance in the desired location� The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or walls� The dishwasher is equipped with water supply
and drain hoses that can be positioned either to the right or the
left sides to facilitate proper installation�
Levelling the appliance
Once the appliance is positioned for levelling, the height of the
dishwasher may be altered via adjustment of the screwing level
of the feet�
In any case, the appliance should not be inclined more than 2°�
NOTE:
Only apply to the free standing dishwasher�
8584
GB GB

Table of Contents

Saba LVIF1019A++44M - Drain Hose and Appliance Positioning; Drain Hose Management; Appliance Positioning and Levelling