Error codes
If there is a malfunction, the dishwasher will display error codes
to identify these:
Codes Meanings Possible Causes
E1 Longer inlet time� Faucet is not opened, or
water intake is restricted, or
water pressure is too low�
E3 Not reaching required
temperature�
Malfunction of heating
element�
E4 Overow� Some element of dishwasher
leaks�
E8 Failure of orientation of
distributary valve�
Open circuit or break of
distributary valve�
E9 Keep pressing a button
more than 30 seconds�
Water or something on the
button�
WARNING
• If overow occurs, turn o the main water supply before
calling a service�
• If there is water in the base pan because of an overll or small
leak, the water should be removed before restarting the
dishwasher�
Technical information
Height (H) 815 mm
Width (W) 598mm
Depth(D1) 550mm (with the door closed)
Depth (D2) 1150mm (with the door opened 90° )
121120
To Next Page
Loading...
