Saeco SUP040RB - Page 77

English
9
77
Press the "Clean" button to select the "COFFEE LENGTH"
menu.
Press the "Coffee" button to access.
Press the "Clean" button or the "Cappuccino" button to
select the desired value and then let the bar advance. the
number on the side identifies the bar value (in pulses).
Then press the "Coffee" button to confirm and exit.
Press the "Clean" button to select the "MILK QUANTITY"
menu.
Press the "Coffee" button to access.
Press the "Clean" button or the "Cappuccino" button to
select the desired value and then let the bar advance. the
number on the side identifies the bar value (in seconds).
Then press the "Coffee" button to confirm and exit.
Press the "Clean" button to select the "HIGH SPEED
MILK" menu.
Press the "Coffee" button to access.
Press the "Clean" button or the "Cappuccino" button to
select the desired value.
By activating this function,
milk and coffee are
dispensed at the same
time.
Then press the "Coffee" button to confirm and exit.
When this phase has been completed, the beverage is
programmed. It is recommended to perform a visual check
of the result. To restore the factory settings of a single
beverage, proceed as follows.