LRF 3013 Integrator Manual
Document number: TML 913655 ver A
Confidential & Proprietary Safran Vectronix AG – All rights reserved
Integrator obligations
Understanding the contents of this manual is the basic requirement in order to use the instrument
safely.
The person responsible for the product must ensure that integrators are qualified and all users
understand and adhere to these instructions.
Avoiding storage and transport damage
When not in use, always keep the LRF module packed in a dry, clean condition.
Remove power prior to prolonged storage.
Observe the specified storage temperatures.
Do not expose the LRF module to strong mechanical shocks
Do not expose the LRF module to abrupt temperature transitions (moisture condensation)
Avoiding measurement errors
Note the factors affecting measurement accuracy as described in chapter 2.1.3 Ranging
Conditions.
Always perform test measurements on targets at known distances if the LRF module was
exposed to rough handling (vibration, shock, drop etc.), and before carrying out any important
measurement tasks.
Changes
New Demonstration Software, grammatical text revisions, document design
To Next Page
Loading...
Need help?
General
