Sage EAS ENDEC - Contents i
Sage Digital ENDEC Quick Start Rev 2.0
1.
About this Document 1
2. Installing Your ENDEC 1
3. Bench Testing 3
4. Connecting your ENDEC to the LAN 3
5. Configuring Your ENDEC 5
5.1 ENDEC Task Sheets 5
5.2 Preparing to configure your ENDEC’s settings 5
5.3 Edit Your Settings 5
5.4 Passwords 6
5.4.1 Front Panel 6
5.4.2 Web Access 6
6. Is the ENDEC Set Up Correctly? 7
7. About the Emergency Alert System 7
7.1 Over the Air 8
7.2 Common Alerting Protocol 8
8. Meeting FCC Requirements 9
8.1 EAS Rules 9
8.2 FCC Testing: On the Air 10
9. EAS/CAP Message Processing 10
10. Hardware Connectors and Indicators 11
10.1 Front Panel 11
10.2 ENDEC Back Panel 12
11. Powering Up the ENDEC 14
12. ENDEC Audio 14
12.1 Analog Audio 14
12.2 Digital Audio 14
12.2.1 Digital Audio Input, Output, and Pass-through 14
12.2.2 Digital Audio Clock 15
12.2.3 Digital Audio Levels 15
12.2.4 Digital Audio Menu Items 15
12.2.4.1 Enable Digital Audio 15
12.2.4.2 Relay Always On 16
12.2.4.3 Pass Through 16
12.2.4.4 Simulcast 16
12.2.4.5 External Clock 16
12.2.4.6 Clock Rate 16
13. Network 16
13.1 ENDEC network use notes 16
13.2 Network Settings 18
13.2.1 Time (NTP) Servers 18
13.2.2 CAP servers 19
13.2.3 Network Printer 19
13.3 Email/FTP settings 19
13.3.1 Email SMTP Server 20
13.3.2 Email Address Lists 20
13.3.3 FTP Server 20
To Next Page
Loading...