For other session types the soft key function INFO typically shows the details
from a single call. Detail fields for other calls than distress are:
Receiving DSC calls
If the radio is in stand-by mode, i.e. not engaged in another session, and a
DSC call is received the call details are shown on the display.
After having silenced the alarm you can
acknowledge the call, put it on hold or display
more information. If you put the call on hold,
the session icon for this call will flash until
you have acknowledged the call.
INFO —other calls Explanation
CALL Type (on received call) – The call type may be shown on
call reception
CAT Category of the call: Urgency, Safety or Routine
FROM The initiator of the call
TO The intended receiver of the call (unless All Ships)
MODE Communication mode (Simplex/Semi-duplex
Telephony supported)
CHANNEL Subsequent communication channel
LAT Latitude position returned upon a position request
LON Longitude position of station in distress
POS UTC Time of position
To Next Page
Loading...
