Chapter 3: Troubleshooting
50 Troubleshooting guide
No connection
between Message
Terminal and
MF/HF radio
The CAN connection does not
work.
Check that the CAN cables are
connected correctly to the
Message Terminal and the
MF/HF radio, and that they
are not damaged.
The MF/HF radio is not
switched on
Check that the MF/HF radio is
switched on and ready.
Other Switch off the MF/HF radio
and the Message Terminal
and switch them back on.
The Message
Terminal shows
“out of paper”
although there is
paper in the
printer.
The paper is not placed
correctly in the printer.
Adjust the paper to the left
side of the printer.
Problem Possible cause Remedy
To Next Page
Loading...
