Allow up to one hour for the sensors to stabilize
due to signal filtering. The indoor and outdoor
humidity sensors should agree within 10 % (the
sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor
and outdoor humidity to a known source.
Check your router for problems.
1. Check WiFi symbol on the display. If
wireless connectivity is successful the
WiFi icon will be displayed in the
time field.
2. Make sure your modem WiFi settings
are correct (network name, and
password).
3. Make sure the console is plugged into
AC power. The console will not connect
to WiFi when powered by batteries
only.
4. The console only supports and
connects to 2.4 GHz routers. If you own
a 5 GHz router, and it is a dual band
router, you will need to disable the 5
GHz band, and enable the 2.4 GHz
band.
5. The console does not support guest
networks.
To Next Page
Loading...
