1. Confirm your password or key is
correct. It is the password you
registered on Wunderground.com.
Your Wunderground.com password
cannot begin with a non-alphanumeric
character (a limitation of
Wundeground.com, not the station).
Example, $worknet is not a valid
password, but worknet$ is valid.
2. Confirm your station ID is correct.
3. Make sure the date and time is correct
on the console. If incorrect, you may
be reporting old data, not real time
data.
4. Make sure your time zone is set
properly. If incorrect, you may be
reporting old data, not real time data.
5. Check your router firewall settings.
The console sends data via Port 80.
To Next Page
Loading...
