SAJ 8000m Series User Manual

8000m Series
- 50 -
Function
Code
Function Descriptions
Minimum
Unit
Factory
Setting
Modifica-
tion Type
FA.16 Current fault type
speed (E004)
5: Over-voltage during
acceleration
(E005)
6: Over-voltage during
deceleration (E006)
7: Over-voltage at constant
speed (E007)
8: Hardware overvoltage (E008)
9: Under voltage of DC bus
(E009)
10: Drive overload (E010)
11: Motor overload (E011)
12: Phase-lack of input (E012)
13: Phase-lack of output (E013)
14: Module overheat (E014)
15: External fault (E015)
16: Communication fault (E016)
17: Reserved
18: Current detection fault
(E018)
19: Reserved
20: Reserved
21: Reserved
22: EEPROM fault (E022)
23: Overload pre-alarm (E023)
24: PID feedback loss fault
(E024)
25: Running time reached
(E025)
26: Counting meter reached
(FULL)
◎
FA.17
Running frequency
at current fault
Hz
◎

SAJ 8000m Series Specifications

General

Brand	SAJ
Model	8000m Series
Category	Controller
Language	English