R5 Series
Chapter 4 Instructions for installation
4.1 Safety Instructions
· Dangerous to life due to potential fire or electricity shock.
· Do not install the inverter near any inflammable or explosive items.
· This inverter will be directly connected with HIGH VOLTAGE power generation device;
the installation must be performed by qualified personnel only in compliance with national
and local standards and regulations.
· This equipment meets the pollution degree II.
· Inappropriate installation environment may jeopardize the life span of the inverter.
· Installation directly exposed under intensive sunlight is not recommended.
· The installation site must be well ventilated.
4.2 Pre-installation Check
4.2.1 Check the Package
Although SAJ’s inverters have surpassed stringent testing and are checked before
they leave the factory, it is uncertain that the inverters may suffer damages during
transportation. Please check the package for any obvious signs of damage, and if
such evidence is present, do not open the package and contact your dealer as soon as
possible
4.2.2 Check the Assembly Parts
Please refer to the packing list inside the package container.
To Next Page
Loading...
