SAJ R5 Series User Manual

R5 Series
- 37 -
6.2 Monitoring Operation
● There is no LCD display screen in R5 series products and they could be monitored
through eSolar APP.
● This equipment is standardly equipped with a USB interface which could transfer
GPRS/4G module (with built-in Bluetooth) and Wi-Fi module to monitor running
state of the equipment.
6.2.1 APP introduction
eSolar could achieve communication with the equipment via Bluetooth, GPRS/4G
and Wi-Fi and it is an APP for nearby and remote monitoring.
Download APP
Users using iOS system could search for “eSolar O&M” in App Store and download
this App.
Users using Android system could search for “eSolar O&M” in Google play and
download this App.
For iOS/Android system, you could visit SAJ official website: www.saj-electric.cn
and scan the QR code to download “eSolar O&M” APP.
Account---Please use the installer account to login.
Note: For the end user, please download and install the “eSolar Air” APP and log in
to the APP or SAJ official website to register your account.
6.2.2 Nearby monitoring
Connecting way 1 — Bluetooth connection
After installing the eSolar GPRS/4G module (with built-in Bluetooh) the mobile
phone could be directly connected with the inverter via Bluetooth.
Figure 6.2 Bluetooth connection schematic diagram

SAJ R5 Series Specifications

General

MPPT	Yes
Display	LCD
Number of MPP Trackers	2
Cooling Method	Natural convection
Type	Grid-tied Inverter
Communication	WiFi, Ethernet, RS485
Operating Temperature Range	-25°C ~ +60°C
Output Voltage Range	230V