R5 Series
Fig. 4.9 Fasten the inverter and hanging panel with screws
4.4.5 Install Anti-theft Lock
As shown in figure 4.10 and 4.11, anti-theft lock could be added to the inverter and
hanging panel. Diameter of the lock hole is φ6.0mm and anti-theft lock of which
the diameter of lock hook is φ5.0mm is recommended.
Users should prepare anti-theft lock by themselves.
Figure 4.10 Install anti-theft lock of R5-3K/4K/5K/6K/8K/9K/10K-T2-AUS
To Next Page
Loading...
