Sako SKI600 - Page 149

143
O ～ FFFFH
BIT0: run/stop
BIT1: reverse/forward
BIT2: zero-speed running
BIT3: reserved
BIT4: accelerating
BIT5: decelerating
BIT6: constant speed running
BIT7: pre-excitation
BIT8: tuning of VFD parameter
BIT9: overcurrent limit
BIT10: overvoltage limit
BIT11: amplitude limiting of torque
BIT12: amplitude limiting of speed
BIT13: speed control
BIT14: torque control
BIT15: reserved
D-24
Current stage of multistage speed
0～15 0
D-25
reserved
— 0
D-26
reserved
— 0
D-27
Current count value
0 ～ 65535 0
D-28
Set count value
0 ～ 65535 0
D-22
Output Terminal Status
0～FH 0
D-23
VFD Running Status
0 ～ FFFFH 0
D-30
Set timing value (S)
0 ～ 65535S 0
D-31
Current length
0.000 ～ 65.535(KM) 0.000
D-29
Current timing value (S)
0 ～ 65535S 0
4.2 Detailed Function Description
D-35
accumulative run time of VFD (hour)
0 ～ 65535H 0
D-36
accumulative power-on time of VFD (hour)
0 ～ 65535H 0
D-37
accumulative run time of fan (hour)
0 ～ 65535H 0
D-32
Set length
0.000 ～ 65.535(KM) 0.000
D-38
Accumulative electricity consumption
(low order digit)
0 ～ 9999KWH 0
D-33
radiator (IGBT) temperature 1
0.0℃～ +110.0℃ 0.0
D-34
radiator (IGBT) temperature 2
0.0℃～ +110.0℃ 0.0