Sako SKI600 - Page 148

142
D-12
Bus voltage (V)
0 ～ 999V 0
D-18
Impulse Frequency Input
0.0 ～ 50.0kHz 0.00
D-13
Input voltage (V)
0 ～ 999V 0
D-19
Analog Output AO1
0.00 ～ 10.00V 0.00
D-14
PID Set Value (V)
0.00 ～ 10.00V 0.00
D-20
Analog Output AO2
0.00 ～ 10.00V 0.00
D-15
PID Feedback (V)
0.00 ～ 10.00V 0.00
D-21
Input Terminal Status
0 ～ FFH 0
D-16
Analog Input AI1
0.00 ～ 10.00V 0.00
D-17
Analog Input AI2
0.00 ～ 10.00V 0.00
Monitoring Parameter
D-00
Output frequency (before slip
compensation)
0.00～ max. output freq.【F0.15】0.00
D-01
Output frequency (after slip
compensation)
0.00～ max. output freq.【F0.15】0.00
D-02
Estimated Motor Frequency
0.00～ max. output freq.【F0.15】0.00
D-03
Main Set Frequency
0.00～ max. output freq.【F0.15】0.00
D-04
Auxiliary Set Frequency
0.00～ max. output freq.【F0.15】0.00
D-05
Output Current
0.0 ～ 6553.5A 0.0
D-06
Output Voltage
0 ～ 999V 0
D-08
Motor Revolving Speed (RPM/min)
0 ～ 36000RPM/min 0
D-09
Motor Power Factor
0.00 ～ 1.00 0.00
D-10
Run Linear Velocity (m/s)
0.01 ～ 655.35m/s 0.00
D-11
Set Linear Velocity (m/s)
0.01 ～ 655.35m/s 0.00
D-07
Output Torque
-200.0 ～ +200.0% 0.0%
4.2 Detailed Function Description