Sako SKI600 - Page 75

069
4.1 Function Code
FC Group - Advanced Function and Performance Parameters
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
FC.24 Jog priority
0: disabled
1: the jog has the highest
priority during the driver
operation
1 0 ×
FC.25 Special function
LED one's place: A02 and
D0 output selection
0: A02 enabled
1: D0 enabled
LED ten's place: OC
function (reserved)
0: disabled
1: enabled
LED hundred's place: OU1
function (reserved)
0: disabled
1: enabled
LED thousand's palce:
reserved
1 10 ×
FC.26
Oscillation suppression
upper limit freq.
0.00 ～ 300.00Hz 0.01 50.00 ○
FC.27
Oscillation suppression
coe󽗋cient
1 ～ 500 1 50 ○
FC.28
Oscillation suppression
voltage
0.0 ～ 25.0%*motor rated
voltage
0.1% 5.0 ○