Sako SKI600 - Page 74

068
4.1 Function Code
FC Group - Advanced Function and Performance Parameters
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
FC.19 AVR function
LED one's place: AVR
function
0: disabled
1: always enabled
2: only disabled when
decelerating
LED ten's place:
overmodulation
0: disabled
1: enabled
LED hundred's place: dead-
time compensation
0: disabled
1: enabled
LED thousand's place:
harmonic components
optimizing
(reserved)
0: disabled
1: enabled
1 1102 ×
FC.20
Oscillation suppressing
initial freq.
0.00 ～ 300.00Hz 0.01
Depending
on model
○
FC.21 Flux braking 0 ～ 100 0: disabled 1 0 ○
FC.22
Energy saving control
factor
0 ～ 100 0: disabled 1 0 ○
FC.23 MS priority
0: disabled
1: MS prior to F0.07 setting
1 0 ×