Sako SKI600 - Page 77

071
4.1 Function Code
FE Group - Panel Function Setting and Parameter Management
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
FE.00
LCD language option
(only for LCD panel)
0: Chinese
1: English
2: reserved
1 0 ○
FE.01 Key M-FUNC function
0: JOG (jog control)
1: FWD/REV switch
2: clear frequency set by
▲/▼
3: switch between local
operation and remote
control (reserved)
4: reverse
1 0 ×
FE.02 Key STOP/RST function
0: only e󽗈ective to panel
control
1: e󽗈ective to both panel
and terminal control
2: e󽗈ective to both panel
and communication
control
3: e󽗈ective to all control
modes
1 3 ○
FE.03
STOP+RUN emergency
stop
0: disabled
1: coast to stop
1 1 ○
FE.04 Close-Ioop display factor 0.01 ～ 100.00 0.01 1.00 ○
FE.05
Display factor of load
rotating speed
0.01 ～ 100.00 0.01 1.00 ○
FE.06 Line speed factor 0.01 ～ 100.00 0.01 1.00 ○
FE.07
Encoder regulation speed
(served)
1 ～ 100 1 70 ○
FE.08
Monitoring parameter
selection 1 in operation
status
0～57 1 0 ○
FE.09
Monitoring parameters
selection 2 in operation
status
0～57 1 5 ○