Salus RT510RF - Schedule Mode

15
6.2 Schedule mode
In this mode, user can set the schedules for thermostat (temperature setpoints for specic periods of time). There are two types of schedules: 5/2 (working
days+weekends) and 7d (7 idividual schedules for each day separately). Schedule type can be choosen by parameter d04 (please refer to Installer mode
section). Schedule is divided by 6 time programs (which means user can have maximum of 6 temperature changes during a day). To programm a schedule
its necessary to ll in all 6 programs. To set schedule please follow steps below:
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
Use the
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
button to select
day / days from which you want to
start programming.
Press the SET button to start
programming.
Press SELECT to conrm.
Press SELECT to conrm.
Press SELECT to conrm.
Press SELECT to conrm.
Use the
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
button to set the
hour for the program #1.
Use the
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
button to set the
minutes for the program #1.
Use the
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
button to set the
temperature for the program #1.
Follow steps 4-9, to dene programs 2-6.
Press SET button at the end of programming to
conrm and save all the settings.
1
3
5
7
9
2
4
6
8
10