Salus RT510RF - Temporary Override Mode; Boost Mode (Hourly Temperature Override Mode)

16
6.3 Temporary override mode
6.4 Boost mode (hourly temperature override mode)
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
Temporary Override mode will be disabled when new schedule will be set.
To turn o hourly temperature override mode before time’s up, press the + Hr button until number of hours disappears from display.
This function is available only in schedule mode (AUTO). If a new setpoint temperature will be set during the schedule - it will be maintained until next
time interval starts according to programmed schedule.
This function is available in schedule and manual mode. It is used to change the setpoint temperature for a specied number of hours (up to 9 hours). Once
that time is over, thermostat returns to previous mode. To set this mode please follow steps below:
Using
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
buttons set new
setpoint temperature during active
schedule.
Press +Hr button to set number of
hours for temperature override (e.g.
to set up override for 3 hours, press
the button 3 times).
Using
TEST / PAIRING
SELECT
SET
or
TEST / PAIRING
SELECT
SET
button set a new
setpoint temperature for hourly
temperature override mode.
After new setpoint temperature set,
thermostat will return to the main
screen and it will temporary override
the schedule.
1 2
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
TEST / PAIRING
SELECT
SET
Press SET button to conrm. Thermostat will work for the set
period of hours. After that it will
switch back to the previous mode.
1
3
2
4