12
ELLIX50 Receipt Printer
1.6.3. Splash Cover Installation
Insert the Splash cover boss(2point) into the Case lower.
1.6.4. Paper Roll Installation
NOTES : Be sure to use paper rolls that meet the specifications. Do not use paper
rolls that have the paper end glued to the core.
1. Open the paper roll cover by pressing the cover-open button.
➋➊
NOTES : To avoid printer damage, do not open the printer cover during printing.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
4. Pull out a small amount of paper, as shown. Then close the cover. Tear
off the paper as shown.
To Next Page
Loading...
