Sam4s ELLIX50 - Specification; General Printer specification; Paper specification

20
ELLIX50 Receipt Printer
2.4. Specification
2.4.1. General Printer specification
Printing method Thermal line printing
Dot density 180dpi
Printing width 72mm
Paper width 80mm
Characters per line(default)
42/21(Font A)
56/28(Font B)
Printing speed
59 lines/sec
250mm/sec
Receive buffer size Max 64kbytes
NOTE : Printing speed may be slower, depending on the data transmission speed
and the combination of control commands.
Supply voltage
Input voltage 100 ~ 240V AC
Frequency 50 ~ 60 Hz
Output voltage +24V DC
Environmental
conditions
Temperature
5 ~ 45°C(Operating)
-10 ~ 50°C(Storage)
Humidity 10 ~ 90% RH; except the paper roll.
Lifespan
Printer Mechanism(MCBF) 70,000,000 lines
TPH 1×10
8
Pulse (150km)
Auto Cutter 1,500,000 Cut
2.4.2. Paper specification
Item Description Remark
Paper Type
Hansol HPK-110 Black color
Mitsubishi PB670 Red/Black color
Mitsubishi PB770 Blue/Black color
Paper Form Paper Roll
Paper Width 80(+0,-1), 3.14
n
(+0,-0.039")
Paper Roll Size Max 83mm
Spool Outside Dia 18mm(0.71")
The Following paper can be used instead of the specified paper above.
• TF50KS-E : Nippon Paper industries Co., Ltd.
• PD 160R : New Oji Paper Mfg, Co.,Ltd.
• F380 : Kansaki Specialty Papers,Inc.(USA)
※
Mitsubishi PB670 / PB770 are two color mode papers.