Sam4s ELLIX50 - Serial Interface(RS-232 C) DIP Switch Set

14
ELLIX50 Receipt Printer
1.7.1. Serial Interface(RS-232C) DIP Switch Set
•
DIP Switch Set 1 Functions
S/W FUNCTION ON OFF DEFAULT
1 Handshaking XON/XOFF DSR/DTR OFF
2 Word Length 7Bit 8Bit OFF
3 Parity Check Yes No OFF
4 Parity Selection EVEN ODD OFF
5
Baud rate
selection
*
Refer to the Following Table
OFF
6 OFF
7 OFF
8 USB Mode VCOM USB OFF
» Baud rate selection
Transmission speed SW - 5 SW - 6 SW - 7 Remark
2400 baud ON ON ON -
4800 baud ON ON OFF -
9600 baud ON OFF ON -
14400 baud ON OFF OFF -
19200 baud OFF ON ON -
38400 baud OFF ON OFF -
57600 baud OFF OFF ON -
115200 baud OFF OFF OFF -
•
DIP Switch Set 2 Functions
S/W FUNCTION ON OFF DEFAULT
1 Emulation STAR EPSON OFF
2 * Kitchen Bell Enable Disable OFF
3 Auto Cutter Disable Enable OFF
4 Self-Test Mode Hex Dump Self-Test Mode OFF
5
Select Print
Density
*
Refer to the Following Table
OFF
6 OFF
7 Download Mode Memory Stick Interface OFF
8 Auto Cutter Tuning - - -
※
Kitchen Bell is option.
» Print Density
Print Density SW-5 SW-6 Remark
1(Light) ON ON -
2 OFF OFF Default
3 ON OFF -
4(Dark) OFF ON -