Sam4s ELLIX50 - Setting Up the Printer; Unpacking; Connecting the Cables

OPERATOR’S Manual
7
CHAPTER 1
Your printer box should include these items. If any items are damaged or
missing, please contact your dealer for assistance.
1.1. Unpacking
You can connect up to three cables to the printer. They are all connected to
the connector panel on the back of the printer, which is shown as below:
USB
connector
Interface connectorDrawer Kick-out
connector
Power supply
connector
NOTES : Before connection any of the cables make sure the both the printer and
connecting device are turned off.
1.2. Connecting the Cables
1
CHAPTER
Setting Up the
Printer
Roll paperPower-cordInterface cable(option)
ELLIX50
Operator’s
Manual(option)
AC AdapterWall Mount(option)
User Guide
ELLIX50
Receipt Printer
All specifications are subject to change without notice.