Sam4s ER-380 - CHECK #

Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 139
Program 90 - Function Key HALO
Use Program 90 to program a high amount lock out (HALO) for a function key. Only specific keys require this
program. For example, you can set a HALO for the CASH, CHECK or CHARGE keys. Refer to the specific
function key programming information in this chapter to determine when the HALO option is available.
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0, press the SBTL key.
0 SBTL 9
3. Enter a HALO of up to eight digits, (or "0" for no HALO).
Enter 1-8 digit
HALO
4. Press the function key on the keyboard you wish to program.
FUNCTION
KEY
5. To program additional function keys, repeat from step 2, or press the CASH key to finalize
the program.
CASH