Sam4s ER-380 - PLU PROGRAM SCAN; MACRO PROGRAM SCAN; Clerk

Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 193
Program Scans
Since much time and energy has been invested in the planning and programming of your Sam4S 3xx,
4xx and 52xx Electronic Cash Registers, it is advisable to print a hard copy of the final program for
future reference. This copy should be kept in a safe place.
Program 15 - Program Scans
1. Turn the control lock to the P position.
2. To print a program scan, enter 1 5, press the SBTL key.
5 SBTL 1
3. In this step, there are three different ways to scan program information. One is PLU, the
other is Macro, and the third is Others.
PLU PROGRAM SCAN
• To read single PLU program information, enter the number (1-1000) of the PLU
and press the same number and PLU key.
PLU
Enter the PLU#,
u
p
to 15 di
g
its
Enter the PLU#,
u
p
to 15 di
g
its
PLU
• Press a PLU key on the keyboard and press same key again.
PLU 1 PLU 1
• To read multiple PLU program information, enter the first number (1-1000) and
press PLU key. Press the last number (1-1000) and press PLU key
PLU
Enter the first PLU#,
u
p
to 15 di
g
its
Enter the last PLU#,
u
p
to 15 di
g
its
PLU
• Press a PLU key on the keyboard.
PLU 1 PLU 10
MACRO PROGRAM SCAN
• To read MACRO information, press the MACRO key to be scanned,
MACRO# MACRO#