182 • Program Mode Programming Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU
Program 701 - Financial Report Message Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit alpha
character codes. To descript by three digit alpha character codes you must select ‘No’ in system option
#25(for 3xx Series)/#30(for 4xx and 52xx Series) (See “System Option Programming).
Programming the Financial Report Message
The Financial Report selection allows you to reprogram the descriptors that appear with the
Financial Report totals and counters. For example, the first total on the financial report
"+PLU TTL" represents the total of all positive PLU entries. You might wish to re-label this
total to say "FOOD SALES". You can reprogram any of the Financial Report totals listed
here with any 18-character descriptor. (See “Financial Report Message”).
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 1, press the SBTL key.
1 SBTL 0 7
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X X/TIME
4. If you are programming using alpha overlay,
Type up to 18
descriptor keys
SBTL
or,
SBTL
Enter up to 18
three
character codes
5. Press the CASH key to finalize the program.
CASH
To Next Page
Loading...
