Sam4s ER-380 - F;S TEND

Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 143
CHARGE (1 ~ 8)
Options - Program 70
CHARGE CASH
Repeat for another
function key
N1 SBTL 0 7 N2 N3 N4 N5
Address OPTION VALUE = SUM
Amount tender is compulsory?
Yes = 1
No = 0
Allow over tendering and under tendering in X control
lock position only?
Yes = 2
No = 0
N1
Disable under tendering?
Yes = 4
No = 0
Open cash drawer?
Yes = 0
No = 1
Allow over tendering?
Yes = 2
No = 0
N2
Non-add # entry compulsory?
Yes = 4
No = 0
Exempt tax 1?
Yes = 1
No = 0
Exempt tax 2?
Yes = 2
No = 0
N3
Exempt tax 3?
Yes = 4
No = 0
Exempt tax 4?
Yes = 1
No = 0
Validation compulsory?
Yes = 2
No = 0
N4
Send to EFT?
Yes = 4
No = 0
N5
EFT Port (0-2; except ER-380 (0-1))
0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80
- Refer to “Program 80 - Function Key Descriptor”
HALO - Program 90
- Refer to “Program 90 - Function Key HALO”