582156110-EN-indC-Pump-20F50 pH.docx 20/11/2020
15
Pump
Recommendations for pumps.
It is imperative to read the compatibilities of motors
and pumps before coupling them together as well as
the special safety instructions.
These instructions are on the pump instruction
manuals.
The pneumatic motor is intended to be coupled to a
fluid section. Never modify the coupling system.
Keep hands away from moving parts.
The parts constituting that movement must be kept
clean.
Before starting up or using the pump unit, read the
PRESSURE RELIEF PROCEDURE carefully.
Check that the pressure relief and drain air valves are
working properly.
It is forbidden to operate the pump without its
protective motor cover - risk of crushing.
It is forbidden to remove the safety valve when the
pump is in operation - check the correct functioning of
the air regulator and the pressure gauge once a
month.
Use only genuine SAMES KREMLIN accessories and
spare parts designed to withstand the operating
pressure of the pump.
Pump feeding phase
It is compulsory to wear PPE (goggles + gloves + safety
shoes).
Force-feeding cycle
The force-feeding cycle must be carried out at a
maximum of 1 bar / 14.5 psi on the pressure gauge of
the air equipment, keeping the gun open. Progressive
manual ascent to the air regulator.
To Next Page
Loading...
