SAMES KREMLIN 20F50 - Page 67

582156110-EN-indC-Pump-20F50 pH.docx 20/11/2020
67
 Screw in the 3 M 6 x 60 (13) SHC screws (13) using a 5
mm Allen wrench.
 Screw on the piston (24) by placing a 15 mm open-
end wrench on the flats of the piston and an 11 mm
open-end wrench on the flats of the intermediate
piston (11).
Tools needed
13
24
11
5
15
11