Samson 3241 Series User Manual

3-6 EB 8015 EN
Design and principle of operation
Dimensions and weights
Table3-1 to Table3-3 provide an overview of the dimensions and weights of the standard
version of Type3241 Valve. Table3-4 and Table3-5 list the dimensions and weights for the
Type3241 Valve with insulating section or bellows seal.
Dimensions in mm · Weights in kg
Table3-1: Dimensions of Type3241 Valve, up to DN150
Valve DN 15 20 25 32 40 50 65 80 100 125 150
Length L mm 130 150 160 180 200 230 290 310 350 400 480
H1 for
actuator
≤750cm² 222 223 262 354 363 390
1000cm²
1400-60cm²
– 413 423 450
1400-
120cm²
2800cm²
–
H2 for
Cast steel 44 72 98 118 144 175
Forged steel 53 – 70 – 92 98 – 128 –
Table3-2: Dimensions of Type3241 Valve, DN200 and larger
Valve DN 200
250 (cast
iron)
250
up to
200mm seat
bore
250
seat bore
250mm and
larger
300
Length L mm 600 730 730 730 850
H4 mm 390 390 451 451 652
H8
1)
for
actuator
1000cm²
1400-
60cm²
418 418 418 503 503
1400-
120cm²
2800cm²
503 503 503 650 650
H2 mm 245 270 310 310 370
1)
H8 increases by 170mm for valves with K
VS
250, 360 or 630 and 60mm rated travel operating
with overtravel.

Samson 3241 Series Specifications

General

Brand	Samson
Model	3241 Series
Category	Control Unit
Language	English