Samson 3375-10 - Page 24

5-4 EB 8332-1 EN
Installation
3 Serrated ring
8 Spacer
1)
9 Snap ring
16 Screw for adjustment gear
17 Terminal board
18 Adjustment gear
19 Contact cam
20 Cam holder
1)
NotrequiredforType3375
9 (2x) 16 (2x)3 8
20
17
18 (2x) 19 (2x)
Fig.5-4: Mechanical limit contacts
The contact cams (19) are ready-mounted to the cam holder (20) and the retaining rings (9)
to form the contact cam unit (21, see Fig.5-6 on page 5-7).
Note