Samson 3375-10 - Page 25

EB 8332-1 EN 5-5
Installation
4 3 6 10
1 2
4 3 6 10
1 2
1 Intermediate gear
2 Spindle gear
3 Serrated ring 1
4 Tension spring
1)
6 Serrated ring 2
1)
10 Shim
1)
2)
NotrequiredforType3375
Fig.5-5: Basic unit
− The listed retrot kits also contain parts
needed to retrot other SAMSON
actuators. Not all the parts in the kits are
required for the Type3375 Actuator.
− To undo the screws on the housing cover,
use a POZIDRIV
®
PZ2 screwdriver to get
enough hold on the screw heads.
Note
To undo the screws on the housing cover, use
a POZIDRIV
®
PZ2 screwdriver to get enough
hold on the screw heads.
The contact cams (19) are ready-mounted to
the cam holder (20) and the retaining rings
(9) to form the contact cam unit (21, see
Fig.5-4).
Note
NoteNote