Samson 3725 - Mounting the Type 3710 Reversing Amplifier

42 EB 8394 EN
Mounting and start-up
5.5.2 Mounting the Type3710
Reversing Amplier
When a Type3710 Reversing Amplier is
used, a connecting plate is placed between
the positioner and reversing amplier. The
reversing amplier is fastened together with
the connecting plate to the positioner using
screws (Fig.16).
The screws supplied with the connecting
plate have a TORX PLUS
®
prole (size 25 IP)
and must be tightened using a suitable tool.
Details on the Type3710 Reversing Ampli-
er: Mounting and Operating Instructions
uEB8392
Connecting plate
Type3710 Reversing
Amplier
Self-tapping screw with TORX
PLUS
®
prole, size 25 IP
Fig.16: Mounting the Type3710 Reversing Amplier
Note