Samson 3725 - Adapting the display; Enabling configuration to change parameters

EB 8394 EN 51
Operating the positioner
7.1 Adapting the display
The display reading direction can be rotated by 180°. If the displayed data appear upside
down, proceed as follows:
1. Touch or until Code P1 appears.
2. Press
to conrm the selected code. P1 blinks.
3. Touch
or until the display is set in the desired direction.
4. Press
to conrm display direction.
7.2 Enabling conguration to change parameters
Before changing parameter settings in an initialized positioner, conguration must be en-
abled rst by selecting Code P19:
LOCK and the key icon indicate that the conguration is locked. De-
activate locking as follows:
1. Touch or until Code P19 appears.
2. Press
to conrm the selected code. P19 blinks.
3. Touch
or until OPEN is displayed.
4. Press
to enable conguration.
If no settings are entered within three minutes, the enabled conguration function becomes
invalid.
Note